DX NetOps

Expand all | Collapse all

Enable Virtual Interfaces In CA Spectrum

Jump to Best Answer
  • 1.  Enable Virtual Interfaces In CA Spectrum

    Posted 10-26-2018 03:07 PM

    I have a simple query how i can enable virtual interfaces in CA Spectrum like Bundle link interface 
    and second the bundles are properly discovered in CA Performance center but they are not visible in CA Spectrum
    because in type and description i didn't find any bundle Ethernet or bundle



  • 2.  Re: Enable Virtual Interfaces In CA Spectrum

    Posted 10-30-2018 10:49 AM

    Hi Abdul,

     

    This depends if the interfaces are listed in the ifTable of the Mib-2.  Spectrum reads the iftable upon discovery and creates the interfaces that it finds in Spectrum.

    It is possible that the vendor does not populate the mib-2 and has their own vendor specific location.  If this is the case then the device would require certification in Spectrum.

    Easiest way to see this would be to query the device from Spectrum MibTools from the Iftable location (1.3.6.1.2.1.2.2).

     

    best regards,

    Glenn



  • 3.  Re: Enable Virtual Interfaces In CA Spectrum

    Posted 10-30-2018 10:54 AM

    Hi GLENN,

     

    i am talking about bundle link interface,

    i think Performance Center and Spectrum use the same MIB file,

    the bundles are properly discovered in CAPC but not in Spectrum......



  • 4.  Re: Enable Virtual Interfaces In CA Spectrum
    Best Answer

    Posted 10-30-2018 11:13 AM

    We support LACP  802.3ad in Spectrum as mentioned here.

     

    Accessing Standard Protocol Information in OneClick - CA Spectrum - 10.2 to 10.2.3 - CA Technologies Documentation 

     

    What you may be asking is the same as this Enhancement Request here.

     

    Improve the representation of Etherchannels/LACP in Oneclick 

     

    Best regards,

    Glenn



  • 5.  Re: Enable Virtual Interfaces In CA Spectrum

    Posted 10-30-2018 02:53 PM

    Thanks GLENN, 
    Provided Link is really helpful.