DX NetOps

  • 1.  How to move NCM to Spectrum 10?

    Posted 05-13-2016 11:28 AM

    I need to move my NCM configuration (scripts, policies, device families, and device configs) from my current production Spectrum 9.4 to the new Spectrum 10.1.1 platform. What is the best means to do this? The modeling gateway export did not include anything NCM.

    Thanx

    Tim



  • 2.  Re: How to move NCM to Spectrum 10?

    Posted 05-13-2016 12:15 PM

    Hi Tim

     

    That all gets preserved and converted by way of an upgrade in place.

     

    Scott



  • 3.  Re: How to move NCM to Spectrum 10?

    Broadcom Employee
    Posted 05-13-2016 12:17 PM
      |   view attached

    Unfortunately NCM components aren’t supported with Modeling gateway.  They cannot be “duplicated” to another version/SSdb.  The only supported way would be to take the SSdb and migrate/upgrade the SSdb from 9.4  to the 10.1 version. If you are merging databases that is one of the caveats.  You’ll need to manually configure NCM again on the models that you ran the modelinggateway import for.

    Cheers

    Jay