CA Client Automation

 View Only
  • 1.  BOOT Image ISO does not respond

    Posted Oct 02, 2014 01:32 PM

    I've been testing with the deployment of an image ISO, I followed all the steps that mentioned the manual, and I have already uploaded the image ISO on the scalability server. my target computer get a response, but nothing happens and shows me the following error.


    Thank you for your attention.



    Marco Velazquez

  • 2.  Re: BOOT Image ISO does not respond

    Posted Oct 02, 2014 03:19 PM

    Did you boot Pamela-PC from PXE?  DHCP give to Pamela PC an IP address and Boot Server IP address?  Boot Server IP address is equal to your Scalability Server?

  • 3.  Re: BOOT Image ISO does not respond

    Broadcom Employee
    Posted Oct 09, 2014 05:26 AM



    Things to check


    1. Boot Order on Pamela-PC is set to boot the NIC (PXE) before any other boot device

    2. Is Pamela-PC and the boot server in the same subnet. If not you need to configure an iphelper to forward the DHCP request to the boot server.


    If you are still unable to get this to work please log a support case so we can look deeper in to the network