sounds funny but the colors in the alarms screen are incorrect:
the Operator Console session logs out after refresh of chrome (f5)
can't filter in the alarms screen like used to in previous versions
if you set up a filter in the alarms view, after you refresh the page (f5) the filters are not saved
everything is cabi - and there is not an easy manual on how to modify your own dashboards of cabi (all the youtube videos are from 2014...)
the spectrumgtw probe causing a lot of issues / there is not a *normal* integration between spectrum and uim.
when you select a device and the goes to the alarms of it and more... you cant go back
when you config a widget (image for example) data source to 'alarm' and then put the device name, if you click on it on live view it sends you to the general alarms view and not to the specific device view
Original Message:
Sent: 02-01-2021 08:08 AM
From: Leandro Zampieri
Subject: *** UIM 20.3.x Defects/Bugs/Gotchas ***
On an existing Alarm Policy it is not possible to change Group, Metric and Component.
To modify these setting the condition must be deleted and recreated.
Original Message:
Sent: 01-26-2021 07:45 AM
From: Leandro Zampieri
Subject: *** UIM 20.3.x Defects/Bugs/Gotchas ***
Hi
With OC 20.3.2 I cannot move a group, it is grayed out. It did work with 9.x
Original Message:
Sent: 01-13-2021 01:55 PM
From: Dane Rafn
Subject: *** UIM 20.3.x Defects/Bugs/Gotchas ***
Opened a support case - after 20.3.x upgrade, usage_metering billing report was double usage it normally is - looking at the report details, new cs_id's were generated for everything but usage_metering still picking up old cs_id's even though they are not tied to anything in cm_computer_systems table
Original Message:
Sent: 12-15-2020 04:19 PM
From: Dan Gill
Subject: *** UIM 20.3.x Defects/Bugs/Gotchas ***
I figured I'd start a new UIM 20.3.x Defects/Bugs/Gotchas thread similar to what Daniel Blanco created for 9.x.
Just so we can all track known bugs and defects.
If you find any 20.3.x related bugs, defects, gotchas, tips please share in this thread so we can all be in the know.
If you have questions then please start a new thread and just this thread for sharing discovered bugs/issues with 20.3.x.
Thank you.