import them into the primary hub archive like you would any other package
then deploy to the primary hub
they will be in the \Nimsoft\install\setup directory.
------------------------------
Gene Howard
Principal Support Engineer
Broadcom
------------------------------
Original Message:
Sent: 02-19-2020 10:56 AM
From: Kevin Nelson
Subject: Copy of 7.97 robot installer
Gene, one thing, these links download the zip file not the exe, I do not have a password to extract from a zip
Thanks
Original Message:
Sent: 02-19-2020 10:34 AM
From: Gene HOWARD
Subject: Copy of 7.97 robot installer
what operating system are you needing this for?
------------------------------
Gene Howard
Principal Support Engineer
Broadcom
Original Message:
Sent: 02-19-2020 10:32 AM
From: Kevin Nelson
Subject: Copy of 7.97 robot installer
Hello, I saw the Broadcom security advisory - Advisory states any UIM product versions 9.20 and below are affected and relates to the robot (which is on every hub or robot based server). The robot versions below 7.97HF8, 9.20HF9 and 9.20SHF9 are affected. I have pushed out 7.97HF8 from the archive to most servers but there are some that I need to locally install and therefore need the standalone installer.
I can't get it from the install\setup folder on my primary hub as 9.2 robot has been downloaded so the only .exe's for the robot are 9.2
Can someone point me to the 7.97 standalone installer please (it is not on the old nimsoft support site in the archive as far as I can see.
Thank you
Kevin