new hub data_engine fails to start

[Technology Operations]

I'm adding a new hub to a domain which will eventually replace the existing primary.

the data_engine probe initializes but stops on the following statement about SLM_QOS licensing.

Dec 4 16:58:51:794 [5996] de: MY admin state: 'secondary', master is at: [/my-dev-domain/stc-hub-dev/my-hostname/data_engine]

Dec 4 16:58:51:798 [5996] de: You need a license for SLM-QOS to run this probe

Dec 4 16:58:52:518 [6620] Controller: Probe 'data_engine' (command = data_engine.exe) returns no-restart code (42)

We have a license with plenty of room but perhaps this new hub has exceeded some kind of limit?  Or is there another cause for this stop?

Thanks

[David Michel]

If you are running UIM 9.2 there is this:
https://ca-broadcom.wolkenservicedesk.com/external/article?articleId=136763

------------------------------
Support Engineer
Broadcom
------------------------------

[David Michel]

or try adding the licenses to both hubs

------------------------------
Support Engineer
Broadcom
------------------------------

[Technology Operations]

David,

Not sure why but the new hub did not have any licenses.  That's a first for me.  

Added the licenses directly to the new hub and that resolved the issue for data_engine.

Thanks!