DX Unified Infrastructure Management

 View Only
  • 1.  Enabling TLS on UIM Hubs

    Posted Feb 04, 2019 03:22 PM


    Has anyone gone thru the process of switching off SSL and enabling the TLS communication on their hubs? 

    If anyone went thru this process do you have any suggestions, tips, or a break down of what you did on each platform? Windows Hubs and Linux Hubs..


    Thank you,

  • 2.  Re: Enabling TLS on UIM Hubs

    Posted Feb 05, 2019 06:58 PM

    If your talking about TLS for The tunnel configuration you can use the following which should pass PCI as it is TLS1.1 and TLS1.2 


    This works for hub version 7.93+ 

    1. Open up the hub inside Infrastructure Manager
    2. Click on Tunnels
    3. Make Sure Server Active is checked if this is the Server
    4. Under Security Settings Click Custom
    5. Inside the Custom box I utilize the following "AESGCM:!aNULL" 
    6. Recommended to recreate the SSL cert if one already existed


    Now if you watch the hub.log you will see something to the affect of starting Tunnels with TLS Enabled or something (can't remember the exact wording but it is on first start and the tunnels get initilized it says it)