DX Infrastructure Management

Expand all | Collapse all

Port check between Robot installed VM and VMware probe discovered VMs in UIM 8.5.1

  • 1.  Port check between Robot installed VM and VMware probe discovered VMs in UIM 8.5.1

    Posted 02-04-2019 10:53 AM

    Hi All,

     

    I am using net_connect probe to check custom port status between two robot installed VMs in our environment. I hope this will check the port connectivity between those two robot installed VMs.

     

    We have some VMware probe discovered VMs where we need to find port connectivity between a robot installed VM and that VMware probe discovered VM. How can i achieve this? What is the probe which i can use in a robot instaleld VM to check other non- robot installed VM port connectivity. All the VMs are connected each other since all are under the same vCenter.

     

    Please help to get this resolved.

     

    thanks

    Kasun



  • 2.  Re: Port check between Robot installed VM and VMware probe discovered VMs in UIM 8.5.1

    Posted 02-05-2019 09:54 AM

    Hello Kasun, you may use curl to test the port connectivity.

     

    https://kb.vmware.com/s/article/2097039

     

    And you may use nexec probe to run the command.

     

    Kind regards

    Britta Hoffner

    Technical Support