DX Infrastructure Management

Expand all | Collapse all

Interface Status Alarms in CA UIM 8.5.1

  • 1.  Interface Status Alarms in CA UIM 8.5.1

    Posted 02-05-2019 03:28 AM

    Hi All,

     

    1.   There are some VMs which are configured for dual IPs on it. My question is does this give an alarm when the secondary IP link down( 10.245.2.191)? Since this is production i cannot test this. Please find the output of the VM details tab.

     

     

     

    2.   Some VMs interfaces are discovered but some do not show any of them. Is there any thing i need to do from my side for this?

     

     

    Any one have similar experiences please help me.

     

    Thanks

    Kasun



  • 2.  Re: Interface Status Alarms in CA UIM 8.5.1

    Posted 02-05-2019 09:37 AM

    Hello Kasun, please raise a support case for this so we can collect vmware probe and discovery_server debug logs to analyses what could cause this differencies.

     

    Kind regards,

    Britta Hoffner

    Technical Support



  • 3.  Re: Interface Status Alarms in CA UIM 8.5.1

    Posted 02-05-2019 10:46 AM

    Hi Britta,

     

    I will , any idea about the question number 1 regarding the dual interface alarms? I have created ping check to the other IP address using net_connect probe, will that be ok ?

     

    thanks

    Kasun



  • 4.  Re: Interface Status Alarms in CA UIM 8.5.1

    Posted 02-06-2019 02:32 AM

    Hello Kasun, vmware probe does not send an alarm when the secondary interface is down. You would have to use net_connect probe for example to check the availability of this interface.

     

    Please mark the question as answered if there are no further questions about it.

     

    Kind regards,

    Britta Hoffner

    Technical Support