DX Unified Infrastructure Management

  • Private Community
 View Only

  • 1.  Static alarm for CDM probe

    Posted Aug 07, 2018 02:13 PM

    Hi Community,

     

    I wonder if the CDM probe can make an alarm using 'less' (<) operators? because we need an alarm if cpu utilization is less than 60% it will generate a minor alarm and if cpu utilization more than 80% it will generate a major alarm.
    I've tried using snmpcollector and it works fine, but is there a way that the CDM probe can do the same thing?

     

    Thanks,

    Andre



  • 2.  Re: Static alarm for CDM probe

    Broadcom Employee
    Posted Aug 08, 2018 01:48 PM

    Currently no this can not be done with the cdm probe static alarms.

    with the dynamic alarms this can be done.



  • 3.  Re: Static alarm for CDM probe

    Posted Aug 08, 2018 02:08 PM

    May I know the rule for dynamic alarms? Because if I use a dynamic alarm, the threshold of each hour will not be the same.



  • 4.  Re: Static alarm for CDM probe

    Broadcom Employee
    Posted Aug 08, 2018 02:24 PM

    I have not had a chance to test this fully.

    the dynamic alarms would be a percentage of the baseline value

    You could set the minor alarm to be <= 60 of the computed baseline to send this alarm.

     

    If this does not meet your needs then you would need to open an ER.



  • 5.  Re: Static alarm for CDM probe

    Posted Aug 08, 2018 02:39 PM

    Thank you for helping me, Gene.

    I guess I need to open an ER.