DX Infrastructure Management

Expand all | Collapse all

Alarm status "OK" from QOS_INTERFACE_UTILIZATIONIN

  • 1.  Alarm status "OK" from QOS_INTERFACE_UTILIZATIONIN

    Posted 09-12-2018 01:28 PM

    Hi All

     

    I am monitoring devices of network with snmpcollctor probe and all it's okay. But I see that there is an alarm "critical" when using the interface down. Please see the screenshot attach.

    How can I prevent that this alarm be generated?

     

     

    Best Regards.

     

    M.E



  • 2.  Re: Alarm status "OK" from QOS_INTERFACE_UTILIZATIONIN

    Posted 09-14-2018 02:07 AM

    Would you please attach Admin Console GUI screenshot of threshold values for the interfaces ?



  • 3.  Re: Alarm status "OK" from QOS_INTERFACE_UTILIZATIONIN

    Posted 09-17-2018 05:52 PM

    Hi Yu...

    I attached the screenshot

     



  • 4.  Re: Alarm status "OK" from QOS_INTERFACE_UTILIZATIONIN

    Posted 09-18-2018 03:00 AM

    Thank you for response. I would suggest.

    1. deactivate baseline_engine probe.

    2. rename <baseline_engine>/cache_dir/threshold.cache.zip

    3. activate baseline_engine probe.

    4. run apply_templates callback in snmpcollector probe.

     



  • 5.  Re: Alarm status "OK" from QOS_INTERFACE_UTILIZATIONIN

    Posted 09-18-2018 10:45 AM

    Okey I will try this. Thanks