DX Infrastructure Management

Expand all | Collapse all

SNMPTD (3.30) Add thresholds on traps (time variable)

  • 1.  SNMPTD (3.30) Add thresholds on traps (time variable)

    Posted 09-18-2018 03:28 PM

    Hi,

     

    Since 3.30 we have the possibility to add ''thresholds'' on received traps we we can get an alarm only after X occurrence of a trap.

    It is maybe an misunderstanding on my part, but I can't see any ''time'' variable in the threshold settings.

     

    For example, I want to receive an alarm if I get more that 50 occurrence of a trap inside an 1 hour). If i cannot set a time variable, i could receive 50 occurrence in 10 days and will receive an alarm for nothing serious...

     

    Thank you in advance for your response



  • 2.  Re: SNMPTD (3.30) Add thresholds on traps (time variable)

    Posted 09-18-2018 11:57 PM
      |   view attached

    Check interval is configurable. Default is 1 min.

     



  • 3.  Re: SNMPTD (3.30) Add thresholds on traps (time variable)

    Posted 09-19-2018 11:18 AM

    Hi Yu,

     

    Thank you for the fast response. The check interval is configurable globally on the probe (if you are referring to the Probe ''setup'' button) --> Interval for ''sending QoS on traps'' option.

     

    I was expecting a configuration per MIB enterprise specific.

     

    Do you know if that is configurable? 



  • 4.  Re: SNMPTD (3.30) Add thresholds on traps (time variable)

    Posted 09-19-2018 09:56 PM

    This is configurable only per probe level. Not profile level.