DX Infrastructure Management

Expand all | Collapse all

Override speed interfaces SNMPCOLLECTOR

Jump to Best Answer
  • 1.  Override speed interfaces SNMPCOLLECTOR

    Posted 03-21-2018 01:49 PM

    Hi everyone.

     

    I am overriding the speed in a interface on snmpcollector probe, but for any reason this override not take the changed. I don't see the change on USM details exactly in "nominal speed"

     

    I have CAUIM 8.5, controller 7.93 and snmpcollector 3.43

     

    Any idea?



  • 2.  Re: Override speed interfaces SNMPCOLLECTOR

    Posted 03-21-2018 02:37 PM

    Don't know, I don't see nominal speed at USM device Details, there is Speed under Interfaces. Also I don't see it under snmpcollector. When selecting a profile > interfaces there is Speed In Override & Speed Out Override, but don't think that will change the Speed shown in USM. 



  • 3.  Re: Override speed interfaces SNMPCOLLECTOR
    Best Answer

    Posted 03-21-2018 07:29 PM

    Interface speeds reported in the interface tab in the UMP USM Portlet are the ifSpeed values returned by the monitored device. If they are incorrect, you can override them in the snmpcollector probe so that the correct speed is used to calculate metrics based on the overridden ifSpeed, but this value will not appear on the interface tab by design.

     

    To see any overridden ifSpeed values on the interface tab of the UMP USM Portlet would require an enhancement request.



  • 4.  Re: Override speed interfaces SNMPCOLLECTOR

    Posted 03-21-2018 09:40 PM


  • 5.  Re: Override speed interfaces SNMPCOLLECTOR

    Posted 03-21-2018 10:25 PM

    yes this is currently working as designed.

    what USM is displaying is interface attribute populated by discovery (discovery_agent or snmpcollector)

    the value is ifspeed or ifHighspeed