DX Infrastructure Manager

Expand all | Collapse all

NO contact with disturbution server.

  • 1.  NO contact with disturbution server.

    Posted 05-11-2017 06:58 AM

    HI all,  insulated a robot and nimbus infrastructure in my client server. I made a connection with tunnel server too. but that client server is not reflecting in my UIM admin console.

     

    And in Distribution its below error. Can anyone help how to fix that same.

     



  • 2.  Re: NO contact with disturbution server.

    Posted 05-11-2017 09:03 AM

    it sounds like you local client hub has a problem with distsrv either not being installed or disabled.

    Check the controller.cfg and make sure the distsrv is listed and set to active = yes

    Might be best just to reinstall the hub and make sure to install the distsrv as well.



  • 3.  Re: NO contact with disturbution server.

    Posted 05-11-2017 11:58 PM

    Hi Gene,

     

    Thanks for your reply.

     

    Now am able to open distribution server rand robot is also running, but that client hub is not visible to my UIM admin console.

    Can you have any video link or document that can help me to fix this error.

    Snip :

     



  • 4.  Re: NO contact with disturbution server.

    Posted 05-12-2017 01:13 AM