DX Infrastructure Management

Expand all | Collapse all

adding network devices in the group and metrics in ca uim

  • 1.  adding network devices in the group and metrics in ca uim

    Posted 02-26-2018 06:27 AM

    how to add network devices in ca uim and the metrics ..pls share any docs on this.



  • 2.  Re: adding network devices in the group and metrics in ca uim

    Posted 02-26-2018 01:06 PM

    Hi there, could you please expand on what you're looking for?

     

    There are a variety of network monitoring probes available. Check out this page and the 'network' section to see a list:

    Deploy Your Monitoring Probes - CA Unified Infrastructure Management - 8.5.1 - CA Technologies Documentation 

     

    This page goes over how to create and manage groups within the USM portlet in UMP:
    Create and Manage Groups in USM - CA Unified Infrastructure Management - 8.5.1 - CA Technologies Documentation 

     

    Hope that helps!



  • 3.  Re: adding network devices in the group and metrics in ca uim

    Posted 02-26-2018 02:46 PM

    Hello Khadagade,

     

    Do you tried to use the probe SNMPCollector?

    This is the Recommended probe to collect Device's informations:

     

    Documentation:

     

    https://docops.ca.com/ca-unified-infrastructure-management-probes/ga/en/alphabetical-probe-articles/snmpcollector-snmp-data-monitoring/snmpcollector-snmp-data-monitoring-release-notes

     


    snmpcollector probe - performance tuning and optimization guidelines
    https://communities.ca.com/docs/DOC-231171554-snmpcollector-probe-performance-tuning-and-optimization-guidelines

     


    Tip about missing metric, probably Certification Request or Self Cert.
    https://communities.ca.com/docs/DOC-231175282-announcing-general-availability-of-uim-snmp-collector-340

     

    If you still need a hand on how to use snmpcollector, we would recommend you to open a CA support Ticket for futher Assistance/help.

     

    Kind Regards,

     

    Alex Yasuda
    Sr. Support Engineer



  • 4.  Re: adding network devices in the group and metrics in ca uim

    Posted 02-26-2018 07:30 PM

    Snmpcollector would be the best bet to monitor network devices.  Please review the document provided by the Support earlier. You may also need to verify the availability of the required certifications for your network devices. You can visit devicesupport.ca.com<http://devicesupport.ca.com> to verify the certification for the network devices you are planning to monitor. In case certification is not available on devicesupport website,You can create your own certification or we will be glad to help you in creating certifications for your network devices. Please feel free to reach us for any help you need.

     

    Thanks

    Balkar Singh

     

    Sent from my iPhone