DX Infrastructure Management

Expand all | Collapse all

SNMP Collector template for Firewall

  • 1.  SNMP Collector template for Firewall

    Posted 01-02-2018 11:04 PM

    Hi All,

     

    Is there is any default SNMP Collector template for monitoring Checkpoint Firewall



  • 2.  Re: SNMP Collector template for Firewall

    Posted 01-03-2018 05:13 AM

    I think there is no OOTB template for Checkpoint Firewall. They are supported though, and you can just create your own template, turning on the metrics and alarms you are interested in to have it applied on all your Checkpoint Firewalls!



  • 3.  Re: SNMP Collector template for Firewall

    Posted 01-05-2018 11:04 AM

    Thanks, how to add all the metric which is applied to firewall in template 



  • 4.  Re: SNMP Collector template for Firewall

    Posted 01-05-2018 11:33 AM

    Hi Praveen,

     

    I just added this link to your other snmpcollector question, but check out the last few slides of this to see an example on creating and modifying templates:

    tech tips - A basic guide for configuring snmpcollector 



  • 5.  Re: SNMP Collector template for Firewall

    Posted 01-05-2018 12:07 PM

    Hi Philip,

     

     Have reviewed the document already ,could not find the required steps 



  • 6.  Re: SNMP Collector template for Firewall

    Posted 01-05-2018 12:49 PM

    You need to follow from slide 11 onwards.

    Create a new template or copy one of the standard ones.

    Then at the metric family level you need to click on the 3 dots and create filters for each one and then you will see the metrics that you can select and configure in the right pane.

    The filters are created but not necessarily used and are quite often left blank, but you have to create them, first, at every level.

    You should use the filter at the top level so that the template is applied to correct devices - quite often I use the user defined field which can be specified in the main probe page for snmpcollector, after you query the discovery server.

    Then specify this in the template.

     

    If you don't see the metric you want from the generic MIB then you can go through the Self Certification process where you can upload a MIB and re-certify a particular metric family. This is done in UMP with the self cert portlet.

     

    Hope this helps a little.

    Regards

     



  • 7.  Re: SNMP Collector template for Firewall

    Posted 01-09-2018 11:03 AM

    Hi Rowan,

     yes i have made self cert and the existing template is getting over written and i cant enable be enable monitoring for added OID



  • 8.  Re: SNMP Collector template for Firewall

    Posted 01-09-2018 11:26 AM

    Hi Praveen, it probably makes sense to go ahead and open a case with Support so we can help to take a look at this. I can't tell if you are seeing unexpected behavior or there is a configuration issue occurring.



  • 9.  Re: SNMP Collector template for Firewall

    Posted 01-09-2018 11:27 AM

    Thanks Philip