linux robot error after installation

[Orwin]

after installing robot on red hat server i am getting error on hdb & spoller probe. controller probe is fine. i checked the communication between hub & linux VM & iptables are off.  below are the logs :-

Controller: Probe 'spooler' FAILED to start, file check determines changes in the probe

no changes are made to spooler.cfg 

[Yu Ishitani]

Hello.

I've seen this in very old RHEL.

Would you please let us know RHEL version ?

[Orwin]

The rhel version is 7

[Yu Ishitani]

Thanks.

Run Security Validation and see how it goes.

 

Highlight RED colored probe

Right click > Security > Validate

[Orwin]

thanks ...but i find it strange... From my Infrastructure Manager, the probe is showing green...but strangely on my Admin Console it is showing yellow. i can see the below log. i am new to UIM, is the probes working fine now ?

 

May 18 11:24:34:200 [140079528798016] Controller: Probe 'hdb' FAILED to start, file check determines changes in the probe
May 18 11:29:12:800 hdb: ###################################################
May 18 11:29:12:800 hdb: History/Database Probe 7.80 [Build 7.80.3132, Jun 1 2015]
May 18 11:29:12:800 hdb: CA
May 18 11:29:32:079 hdb: ###################################################
May 18 11:29:32:079 hdb: History/Database Probe 7.80 [Build 7.80.3132, Jun 1 2015]
May 18 11:29:32:079 hdb: CA
May 18 11:30:33:058 hdb: ###################################################
May 18 11:30:33:058 hdb: History/Database Probe 7.80 [Build 7.80.3132, Jun 1 2015]
May 18 11:30:33:058 hdb: CA
May 18 11:38:23:527 hdb: ###################################################
May 18 11:38:23:527 hdb: History/Database Probe 7.80 [Build 7.80.3132, Jun 1 2015]
May 18 11:38:23:527 hdb: CA

 

May 18 11:24:33:110 [140079528798016] Controller: Probe 'spooler' FAILED to start, file check determines changes in the probe
May 18 11:29:53:168 [139778143192896] spooler: ########## START ##########
May 18 11:29:53:168 [139778143192896] spooler: Robot Spooler 7.80 [Build 7.80.3132, Jun 1 2015]
May 18 11:29:53:168 [139778143192896] spooler: CA
May 18 11:29:53:168 [139778143192896] spooler: PID=5852, loglevel=0
May 18 11:29:53:168 [139778143192896] spooler: robot=sgkdglssv001 domain=RAMS
May 18 11:29:53:168 [139778143192896] spooler: spooling=off flush_timeout=900 flush_priority=5 flush_records=1000
May 18 11:29:53:168 [139778143192896] spooler: expire=604800
May 18 11:29:55:174 [139778143192896] spooler: flushing is set to OFF, hub=10.88.220.206 port=48001
May 18 11:30:29:801 [140624088426304] spooler: ########## START ##########
May 18 11:30:29:801 [140624088426304] spooler: Robot Spooler 7.80 [Build 7.80.3132, Jun 1 2015]
May 18 11:30:29:801 [140624088426304] spooler: CA
May 18 11:30:29:801 [140624088426304] spooler: PID=5902, loglevel=0
May 18 11:30:29:801 [140624088426304] spooler: robot=sgkdglssv001 domain=RAMS
May 18 11:30:29:801 [140624088426304] spooler: spooling=off flush_timeout=900 flush_priority=5 flush_records=1000
May 18 11:30:29:801 [140624088426304] spooler: expire=604800
May 18 11:30:31:010 [140624088426304] spooler: flushing is set to OFF, hub=10.88.220.206 port=48001
May 18 11:38:52:457 [140069077964608] spooler: ########## START ##########
May 18 11:38:52:457 [140069077964608] spooler: Robot Spooler 7.80 [Build 7.80.3132, Jun 1 2015]
May 18 11:38:52:457 [140069077964608] spooler: CA
May 18 11:38:52:457 [140069077964608] spooler: PID=6861, loglevel=0
May 18 11:38:52:457 [140069077964608] spooler: robot=sgkdglssv001 domain=RAMS
May 18 11:38:52:457 [140069077964608] spooler: spooling=off flush_timeout=900 flush_priority=5 flush_records=1000
May 18 11:38:52:457 [140069077964608] spooler: expire=604800
May 18 11:38:54:559 [140069077964608] spooler: flushing is set to OFF, hub=10.88.220.206 port=48001

[Yu Ishitani]

Hello.

Seems working.

 

Regards,

Yu