Disable 'Compute Baseline, Admin Console

[Kenneth Svensson]

Hi,

I'm trying to uncheck 'Compute Baseline' in Admin Console for the probe diskstat. But when saving and looking at the profile again, it is still active. Am I missing something?

 

/kenneth

 

[Christophe_Sperandio]

Are you sure the baseline_engine probe is running as expected on the hub supporting that?

[Kenneth Svensson]

I think so. In the status tab under the hub it seems fine.

 

[Christophe_Sperandio]

Can you double check in the log of the probe? The probe can be attached to queues, still having a problem to work properly.

Also, which version of UIM are you using? Which version of the probe? Which version of the ppm probe?

[Kenneth Svensson]

UIM 8.5

baseline_engine 2.76

ppm 3.40

 

With log level 3 I get this during startup:

 

2017-12-05 15:18:37.196 [ main] INFO engine.Engine - ********************************************
2017-12-05 15:18:37.196 [ main] INFO engine.Engine - initialization start engine = baseline_engine version = 2.76 build = 3
2017-12-05 15:18:37.226 [ main] INFO nimbus.NimProbe - ****************[ Starting ]****************
2017-12-05 15:18:37.226 [ main] INFO nimbus.NimProbe - 2.76
2017-12-05 15:18:37.227 [ main] INFO nimbus.NimProbe - CA Technologies
2017-12-05 15:18:37.233 [ main] INFO nimbus.NimProbe - port=48021
2017-12-05 15:18:37.258 [ main] INFO u76.Upgrade80 - upgrade80 previously preformed
2017-12-05 15:18:37.258 [ main] INFO baseline.BaselineEngineImpl - Retention Period: 4
2017-12-05 15:18:37.306 [ main] INFO calculator.DataGathererImpl - metIds are initialized
2017-12-05 15:18:37.308 [ main] INFO nimbus.NimProbeBase - Login to NimBUS is OK
2017-12-05 15:18:37.317 [ main] INFO baseline.BaselineConfigImpl - setLogStartUp() logLevel = 3
2017-12-05 15:18:37.369 [ buildEx-1] INFO queuemessengerimpl.QueueReaderImpl - Queue baseline_engine.QOS_MESSAGE is active
2017-12-05 15:18:38.346 [ buildEx-1] INFO calculator.DataGathererImpl - metIds are initialized
2017-12-05 15:18:38.392 [ buildEx-1] INFO analytics.MapDbHashSet - Not using memory mapped files for mapdb
2017-12-05 15:18:38.570 [ buildEx-1] INFO calculators.UpdateBaselinesImpl - update baselines
2017-12-05 15:18:38.571 [ buildEx-1] INFO calculators.UpdateBaselinesImpl - updating baselines for new hour
2017-12-05 15:18:38.579 [ buildEx-1] INFO queuemessengerimpl.QueueReaderImpl - Queue baseline_engine.BASELINE_CONFIG is active
2017-12-05 15:18:38.926 [entsession] INFO queuemessengerimpl.QueueReaderImpl - onBulkQueueMessage
2017-12-05 15:18:39.691 [ Thread-6] INFO calculators.UpdateThread - baselines updated for hour = 15

 

and then it it keeps putting out:

2017-12-05 15:25:34.681 [entsession]  INFO  queuemessengerimpl.QueueReaderImpl - onBulkQueueMessage

[Britta Hoffner]

Hello Kenneth, I would suggest to open a support case for this question.

 

Kind regards,

Britta Hoffner

CA Support

[Kenneth Svensson]

OK, thanks!