DX Infrastructure Manager

Expand all | Collapse all

Cdm CPU stats for Solaris

Jump to Best Answer
  • 1.  Cdm CPU stats for Solaris

    Posted 04-26-2017 03:12 PM

    Hi all,


    For soalris, cdm executes mpstat command to get CPU stats, now my question is that the output is shown for the global zone or local zones ?


    I'm a bit confused as I see for some servers which are of same global zone have almost the same CPU stats.


    Regards,

    Ankur



  • 2.  Re: Cdm CPU stats for Solaris

    Posted 04-26-2017 08:07 PM

    Where do you have the cdm probe installed?

     

    mpstat - When executing in a zone and if the pools facility is active, mpstat(1M) will only provide information for those processors which are a member of the processor set of the pool to which the zone is bound

     

    logically you should get the stats of Non-Global Zones if cdm is on a VM



  • 3.  Re: Cdm CPU stats for Solaris

    Posted 04-26-2017 11:59 PM

    Well it is installed on the local zone as the robot is configured with the IP of local zone ( I guess that's makes under local zone ) 


    Is there a config on cdm by which we get the stats for the particular pool ? As of now its showing me same values for the same zone servers.



  • 4.  Re: Cdm CPU stats for Solaris
    Best Answer

    Posted 04-27-2017 01:15 AM

    Try checking through probe config, select the cdm probe and ctrl+p . see what info you see here . 

     

    Also try running the mpstat command directly on the VM and see the result 

     



  • 5.  Re: Cdm CPU stats for Solaris

    Posted 04-27-2017 07:58 AM

    Thanks Phani. I got the clarity now :)