DX Infrastructure Manager

Expand all | Collapse all

Bypass Alarm the NAS suppression setting

Jump to Best Answer
  • 1.  Bypass Alarm the NAS suppression setting

    Posted 02-02-2017 12:16 PM

    My NAS is configured to Suppress messages

     

     

    First says OPEN, then subsequent are SUPP

     

    This works well in our environment, but I have one particular log file to monitor where I would like to send the trap each time even if the message is nearly identical.  I think I am saying, I would like to bypass the NAS suppression so that every alarm sends a trap to spectrum.  Is it possible to configure this for this individual one off situation?



  • 2.  Re: Bypass Alarm the NAS suppression setting
    Best Answer

    Posted 02-02-2017 08:12 PM

    Hello, Floydian.

    You can deactivate "Activate message suppression" but please note it applies to all the alarms.

     

    Regards,

    Yu Ishitani



  • 3.  Re: Bypass Alarm the NAS suppression setting

    Posted 04-25-2017 06:40 AM

    Logmon lets you specify a suppression key for the individual watcher. Just make the suppression id the line of text from your log and it will take precedence over the 50 characters of the message text. That also gets around the issue where digits aren't considered significant to easily get around having dates in the log message but sometimes digits are significant elsewhere in the message.

     

    -Garin