DX Infrastructure Manager

Expand all | Collapse all

Transfer selected Alarms from one hub to an other hub

Jump to Best Answer
  • 1.  Transfer selected Alarms from one hub to an other hub

    Posted 09-21-2016 12:40 AM

    Hello everyone.

     

    I have a question about the Transfer of some selected alarms to an other hub.

     

    Our Environment:
    Primary hub for germany

    Secondary hub for spain

    UMP is connected to the german hub but shared with spain.

     

    Our spanish colleagues use the function of notification in the UMP SLA Manager. But those alarms will be send to the german hub (because the UMP is connected to the german hub). How I get those alarms to the spanish hub. I only want this alarms (based on the Subsystem ID) to be send to the spanish hub....not everything.

     

    I already tried to manipulate the Alarm by a LUA script or resend an Alarm to the spanish hub but didn´t work.

     

    NAS is installed on both hubs.

     

    Kind regards

    Jessica



  • 2.  Re: Transfer selected Alarms from one hub to an other hub
    Best Answer

    Posted 09-21-2016 01:44 AM

    Hi Jessica,

     

    I am not sure I totally understand your question.  You could try this:

     

     

    1.       Create an AO profile on your primary NAS to repost the desired alarms with subject “alarm3” to primary hub

     

    2.       Create an ATTACH queue on the primary hub and corresponding GET queue on secondary

     

    3.       Append alarm3 in the subject for the existing NAS queue on your secondary hub

     

    Thanks



  • 3.  Re: Transfer selected Alarms from one hub to an other hub

    Posted 09-21-2016 07:55 AM

    Hello.

     

    Sounds like you understand me correct! :-)

    But how can I Change the subject to alarm3 or re-post it to alarm3?

    Via LUA and Nimbus.alarm?

     

    Kind regards

    Jessica



  • 4.  Re: Transfer selected Alarms from one hub to an other hub

    Posted 09-22-2016 05:44 AM
      |   view attached

    You will need to create an AO profile on your primary NAS –

     

     

    Thanks



  • 5.  Re: Transfer selected Alarms from one hub to an other hub

    Posted 09-23-2016 03:18 AM

    Ah stupid me!!!

    I greated the AO profile and the queues. In the Status I can see that the Queues send the Event but it`s not visible in the spanish hub. Maybe because they come with the subject alarm3?



  • 6.  Re: Transfer selected Alarms from one hub to an other hub

    Posted 09-23-2016 03:43 AM

    I got it!!!!

    Had to expan the nas config for subject alarm2 and Alarm3.

    Thank you really much for your help!!!