Hardware Sizing for 100 nodes

[Halim Liauw]

Hi All,

 

If we have around 100 nodes (we will install the robots on these 100 nodes) and we want to keep the QoS data default setting. Can I propose three servers:

1. Primary Hub Server

2. DB Server

3. UMP Server

 

Is it necessary to setup secondary hub? How many nodes can primary hub handle?

 

Cheers,

[Anon Anon]

Hi,

 

Your setup seems appropriate. One hub can handle many more robot than 100. If you get a lot of people subscribers on the hub, you might need a secondary hub, but I bet you'll be just fine with the proposed setup.

 

-jon

[Louis Savage]

Are you can just switch over to a *nix system and don't have to worry about the subscriber issues.

[Anon Anon]

hi,

 

we have big ENV (500 robots + many other monitors) and i use only 1 hub - it works great..)

 

i can just advise you - if you are planing to have remote monitors such as net connect, celerra, clariion act. - i suggest to use another different server to those monitors - and to configue properly any memory for each probe..

 

regads