VMware vSphere

 View Only
  • 1.  Windows 10 1809 Upgrade failes

    Posted Nov 20, 2018 02:37 PM

    Hello,

    we have about 400 Windows 10 VDIs in use. We are currently trying to install the upgrade Windows 10 1809. Our hard disk controllers are available as SCSI controllers. During the upgrade the virtual machine gets stuck in the boot screen and does a rollback. The failure "The installation failed in the SAFE OS phase with an error during the INSTALL_UPDATES operation" appears.  If I connect the hard disks to the IDE controller, the upgrade works. The latest VMWare tools are already installed (10.3.5). But we wouldn't like to switch all VDIs to IDE controllers. Is there a general problem?  I hope someone has an another idea. Thanks in advance.

    With kind regards
    Dominik Geb



  • 2.  RE: Windows 10 1809 Upgrade failes
    Best Answer

    Posted Nov 23, 2018 02:45 PM

    Hello,

    I found a solution. The problem appears, when the virtual machine has a snapshot.
    It looks like a incompatibiliy with the VMFS6 datastore and Windows 10 1809.
    On a datastore with VMFS5 is it working (with snapshots). I think Microsoft or VMWare will fix this in the future.

    With kind regards

    Dominik Geb



  • 3.  RE: Windows 10 1809 Upgrade failes

    Posted Aug 14, 2020 09:36 PM

    We ran into this as well.  Your fix did not work for us.  We found that shutting down the VM, removing the VM's USB device from the Hardware tab, and powering on then enabled us to install the 1809 patch.