vCenter

 View Only
  • 1.  VCSA - Failed to configure network, can ping and ssh.

    Posted Sep 03, 2015 04:37 PM

    Hello,

    My VCSA starts but gives me a "Failed to configure network" error. We have no DHCP on the LAN. I can ping and ssh into the appliance. From within the command line of the appliance I can ping the gateway. I'm not sure what else to try.

    DNS/Reverse DNS was set before I ran the install.

    I have manually entered the network settings in /etc/syscconfig/networking/devices

    Other systems on this host can see the network just fine.

    Please help!

    Thanks,

    Paul



  • 2.  RE: VCSA - Failed to configure network, can ping and ssh.

    Posted Sep 09, 2015 07:46 PM

    I fixed my instance. I added the networking section to the template file and re-ran the instance.

    Look at Table 6 and the full_conf.json template and just plug in everything. Be sure to use a FQDN

    Worked for me anyway.



  • 3.  RE: VCSA - Failed to configure network, can ping and ssh.

    Posted Sep 07, 2016 08:01 AM

    I tried all the options in the example templates provided, run with the vcsa-deploy script (Linux). Nothing worked.

    Running the installation from Windows "vcsa-setup.html" though worked flawlessly. The actions run by the Windows installation didn't seem to be the same as the ones from the "vcsa-deploy" script in Linux.



  • 4.  RE: VCSA - Failed to configure network, can ping and ssh.

    Posted May 23, 2017 03:03 AM

    Sorry I know this is post from next year, however I want to know how do I fixed that for VCSA 6.5 embeded version ?

    I am still getting the "Failed to configure network" message even I tried to configure the network from the console again and again.

    I also tried to reboot. Nothing happen.