ESXi

 View Only
  • 1.  Running ESX under ESX with a Guest HP VSA SAN

    Posted Aug 21, 2011 03:30 AM

    Hi,

    I am running an ESX host under a physical ESX host per these steps.  Both are on ESX4.1.  I have imported the HP VSA SAN on the virtual ESX host to test a few scenarios but I am unable to complete it's bootup steps since it is showing the error below.

    Do you know how I can address this issue?  I looked online and it might be due to the Guest OS being unable to see a compatible processor to boot up the 64bit OS.  I wanted to disable the ParaVirtualization but I cannot locate it under Options > Advanced > Paravirtualization of the Settings for the VSA VM.

    Does anyone know how I can resolve this so I can test under these conditions?  Thanks in advance for any help.



  • 2.  RE: Running ESX under ESX with a Guest HP VSA SAN
    Best Answer

    Posted Aug 21, 2011 03:48 AM

    You cant run nested 64bit VMs with ESXi 4.  No amount of changing options will change that.



  • 3.  RE: Running ESX under ESX with a Guest HP VSA SAN

    Posted Aug 21, 2011 08:49 AM

    As mentioned by mcowger, nested 64-bit guests currently don't work, because the necessary processor setting (VT) is not passed through to the guest. Unless you want to try the HP VSA cluster capabilities by installing the VSA appliance on multiple ESX hosts, I'd suggest you setup and run the VSA on the physical instance of ESX and configure the virtual network to access it from the guests.

    André



  • 4.  RE: Running ESX under ESX with a Guest HP VSA SAN

    Posted Aug 21, 2011 03:47 PM

    Thank you both.  I thought I was missing something about the Paravirtualization.  I have also tested this with a nested CentOS 6 64-Bit.