I have two 10GB network adapters setup on on vswitch. These are connected to trunk ports on the physical switch. I am trying to bring a new VLAN into the environment but the way I am looking at things the new VLAN is not available.
Here is the information from the adapter.
Status |
Status | Connected |
Actual speed, Duplex | 10 Gbit/s, Full Duplex |
Configured speed, Duplex | 10 Gbit/s, Full Duplex |
Networks | 10.30.1.1-10.30.1.127 ( VLAN100 ) 10.30.5.128-10.30.5.191 ( VLAN5 ) 0.0.0.1-255.255.255.254 ( VLAN2500 ) 0.0.0.1-255.255.255.254 ( VLAN700 ) |
I am trying to bring in VLAN 702 which is on the list of vlans in the switch configuration.
My question is how are these networks (VLANS) assigned to this physical adapter , how do I edit this information?
Thanks