VMware vSphere

 View Only
  • 1.  No data after failed drive on spanned array replaced

    Posted Nov 05, 2017 09:42 AM

    I had a datastore that spanned 2 RAID5 arrays on an external enclosure connected via an HP P431 adapter. The other day, a drive fails and the array goes offline. So I replace the failed drive and according to the HP tools the array rebuilt without errors. Once ESXi 6.5 is back online, I check the datastore, which now shows active again and properly spanned, but the VMDK that was stored on there is missing. The odd thing is that it still shows the same amount of space being used before the drive failed (9.09 / 9.1TB used) as if it's still there. I even checked the console and "df -h" shows the same amount of storage being used but no files, other than normal ones are present on the datastore. The folder that stored the VMDK, the only folder that was on there, is now missing. Does anyone have any ideas? The data isn't super critical but I'd sure as heck like to get it back if I can. Any help would be greatly appreciated, thank you!



  • 2.  RE: No data after failed drive on spanned array replaced
    Best Answer

    Posted Nov 05, 2017 10:19 AM

    Welcome to the Community,

    try to contact continuum​. He might be able to help.

    André



  • 3.  RE: No data after failed drive on spanned array replaced

    Posted Nov 05, 2017 09:23 PM

    I will post in the "VMDK Doctors" topic and seek help there, thank you for the suggestion!