Hello everyone,
i have an understanding question.
What I have:
vCenter 7.0
3x ESXI 7.0: 2x 10 GBit; 2x 25 GBit
2x 10 GBit Switch
2x 25 Gbit Switch (configured as Stack)
Distributed Switch with following Network groups and NICS:
Production Network: VLAN 100 - nic 0 (active); nic1 (active)
vSAN kernel: VLAN 200 - nic 2 (active) ; nic 3 (active)
VMotion kernel: VLAN 300 - nic 2 (active) ; nic 3 (active)
What I want:
Failover configuration for all networks
My idea:
Production: On my 10 GBit Switches VLAN 100 is configured. nic 0 is connected to 10GSwitch1, nic 1 is connected to 10GSwitch 2 (both have an uplink port to Core Switch)
vSAN / vMotion: On my 25 GBit Switches VLAN 200 and VLAN 300 are configured. nic 2 is connected to 25GSwitch1, nic 3 is connected to 25GSwitch2
Here a possible configuration:

My Question:
Will there be loops on the Porduction sides and how can I prevent them?
Will the vSAN /vMotion network have connectivity problems with this configuration?
Thank you for your answers