vSphere Storage Appliance

 View Only

  • 1.  iSCSI port binding - two iscsi subnets on one vswitch

    Posted May 09, 2016 09:23 AM

    Hello,

    Is below scenario supported regarding iSCSI software port binding (ESXi 6.x)?

    Two iSCSI storage devices (2 controllers each) in two different subnets: 192.168.10.x and 192.168.20.x (mask 255.255.255.0).

    Host ESXi with one iSCSI vSwitch.

    Four vmkernel portgroups: two in 192.168.10.x subnet and two in 192.168.20.x subnet.

    There is an ISCSI software port binding configured for each vmkernel port.

    Please note, that this scenario is little bit different from examples on VMware KB: Considerations for using software iSCSI port binding in ESX/ESXi



  • 2.  RE: iSCSI port binding - two iscsi subnets on one vswitch
    Best Answer

    Posted May 09, 2016 06:16 PM

    That won't work this way. iSCSI port binding requires a one-to-one relationship between vmkernel ports and vmnics.

    From https://kb.vmware.com/kb/2045040

    To set up a teaming policy that is compatible with iSCSI port binding you need 2 or more vmkernel ports in the vSwitch and an equivalent amount of physical adapters to bind them to. ...


    André



  • 3.  RE: iSCSI port binding - two iscsi subnets on one vswitch

    Posted May 11, 2016 11:18 AM

    Thank you for your opinion.