VMware vSphere

 View Only
  • 1.  HP Servers cannot read out Physical Drive status

    Posted Apr 16, 2019 10:27 AM

    Hi,

    I have some problems regarding several HP Servers.

    HPE ProLiant ML350 Gen9 > P440AR Raid Controller

    HPE ProLiant DL380 Gen10 > HPE Smart Array P408i-a SR Gen10 controller

    First, everything in ILO is Green. HPE did take a look at de Active Health System logging. In this logging everything is fine, no errors found by technican from HPE.

    Vmware ESXi 6.5 u1 HPE Custom running on de ML350 Gen9 and on the DL380 Gen10 is Vmware ESXi 6.5 u2 HPE Custom running.

    I checked the CIM service and the service is running.

    When i go to the tab monitor > storage the following warning appears: The Small Footprint CIM Broker Daemon (SFCBD) is running, but no data has been reported. You may need to install a CIM provider for your storage adapter.

    On both servers:

    I started an SSH session with the host and found on internet following commands to check the CIM service.

    Command: esxcli system wbem get

    Output:

    Authorization Model: password

       Enabled: true

       Loglevel: warning

       Port: 5989

       WSManagement Service: true

    Command: /etc/init.d/sfcbd-watchdog status

    Output: sfcbd is running

    Command: /etc/init.d/sfcbd-watchdog test

    sfcbd-init: Checking core components of sfcbd are running...

    sfcbd-init: Component sfcb-ProviderMa is running.

    sfcbd-init: Component sfcb-HTTP-Daemo is running.

    sfcbd-init: Component sfcb-HTTPS-Daem is running.

    sfcbd-init: All components are running.

    Still no data can be read in the monitor > storage tab.

    I have some other ML350 Gen9 servers which can be read. There have been no difference with installing the Vmware ESXi and are HPE Custom.

    Could someone help me out with this problem? HPE won't help me because there are no hardware related issues.

    Thank you in advance.

    Best Regards,

    Max



  • 2.  RE: HP Servers cannot read out Physical Drive status

    Posted May 08, 2019 12:35 AM

    Hi Max,

    I'm experiencing the exact same issue with several HP ProLiant G9 servers and ESXi 6.5 U1 and U2 (Build 13004031).

    Anyone from VMware willing to assist?

    Thanks,

    Gabriel



  • 3.  RE: HP Servers cannot read out Physical Drive status

    Posted Jun 27, 2019 10:01 AM

    Unfortunately, we have the same issue on dozens of HPE ProLiant ML350 Gen10 servers, running HPE Customized Image ESXi 6.5.0 Update 2 version 650.U2.10.3.5.

    Anybody knows how to fix this issue? To us it's really a serious problem, as we can't monitor effectively the controller and the disk status of the servers.

    Thank you in advance.
    Best regards,

              Fabrizio