VMware NSX

 View Only
  • 1.  How to create private network across hosts

    Posted Sep 30, 2016 03:29 PM

    I'm standing up a new Microsoft failover cluster with 3 VM's spread across 3 ESXi 6 hosts.  I need to create a private network for the heartbeat adapters.  We're using the Nexus 1000v switch.  Looking for guidance on how to do that?  I'm brand new to dvS.  Thanks in advance.

  • 2.  RE: How to create private network across hosts

    Posted Oct 02, 2016 11:51 PM

    The VMware vSphere™ vNetwork may be more suitable for your topic.

    You can think dvs/VDS/Nexus1000v as a Layer 2 switch.

    So if you want a private network, create a VLAN network which is port-profile on Nexus 1000v and will be seen as a dvPortGroup in dvs/VDS.

    You need the network to be accessible across 3 ESXi hosts, so on the uplink physical switches where the ESXi hosts are connected you will also need to create the corresponding VLAN matching with the port-profile.

    There is no need to create gateway or interface VLAN on the physical switches as you want these to be private.

    Then don't you may need multiple Network Adapters on the 3 VMs for the private network.