VMware vSphere

 View Only
  • 1.  Firmware update on HP DL380 Gen9

    Posted Jul 28, 2020 01:02 PM

    Hi guys,

    Quick query, VMware support caught a bug with a customer

    https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00073323en_us

    Their hosts werent upgraded

    Upgrade path is from ESXi 6.5 EP 11 up to ESXi 6.5 EP 20  

    https://kb.vmware.com/s/article/2143832?lang=en_us)

    just looking to confirm best way to do this?

    Put each host (all 3 have same firmware at present) into maintenance and use VMware Update Manager?

    I have seen it work automatically, I'm not sure where to get the files from VMware or HPE?

    Any caveats I need to be aware of, did this a few years for 5.5 and 6.0 just wanted to check in for 6.5

    Thanks in advance :smileyhappy:



  • 2.  RE: Firmware update on HP DL380 Gen9

    Posted Jul 28, 2020 01:26 PM

    In order to upgrade your HPE servers' firmware, you can download Service Pack for Proliant (SPP) from HPE Website:

    https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_8ccab9e4b99047138c2e608f97

    For downloading Patches you can use this link:

    https://my.vmware.com/group/vmware/patch

    Lastly, with your reported bug it seems updating via VUM might be unsuccessful. Hence, you may need to patch the hosts manually.



  • 3.  RE: Firmware update on HP DL380 Gen9

    Posted Jul 28, 2020 01:30 PM

    You can download the latest custom image for HPE from https://my.vmware.com. Once you select the desired version from the downloads page ex: 6.5 go to custom ISO.

    Also refer the below links to ensure your HPE ESXi image and Firmware are in alignment.

    https://vibsdepot.hpe.com/hpq/recipes/HPE-VMware-Recipe.pdf

    http://vibsdepot.hpe.com/mapping/SPP-HPE_Custom-Image-vibsdepot-mapping-Gen9-later.pdf

    The upgrade can be performed using VUM, however you might need to delete the AMS file from the hosts first.

    BTW, Gen9 does support ESXi 6.7, you can also consider moving your environment to 6.7. This will need more work though if your VCSA is still on 6.5 and if there are additional VMware components interoperating (NSX, etc).