I've got several esxi blade hosts. Every host is running on the same hardware. Every was installed on usb sd flash card placed in server. Reboot any of this host is not passible at this time.
The problem is on two hosts (ESXi 4.1.0 build 502767). ESXi doesn't see usb sd card (which is installed on).
fdisk -l on this hosts doesn't show sd card. On the helathy host fdisk -l show:
Disk /dev/disks/mpx.vmhba32:C0:T0:L0: 16.0 GB, 16022241280 bytes
64 heads, 32 sectors/track, 15280 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Device Boot Start End Blocks Id System
/dev/disks/mpx.vmhba32:C0:T0:L0p1 5 900 917504 5 Extended
/dev/disks/mpx.vmhba32:C0:T0:L0p4 * 1 4 4080 4 FAT16 <32M
/dev/disks/mpx.vmhba32:C0:T0:L0p5 5 254 255984 6 FAT16
/dev/disks/mpx.vmhba32:C0:T0:L0p6 255 504 255984 6 FAT16
/dev/disks/mpx.vmhba32:C0:T0:L0p7 505 614 112624 fc VMKcore
/dev/disks/mpx.vmhba32:C0:T0:L0p8 615 900 292848 6 FAT16
whitch is corretcly.
I think, the consequence of this is why I can't download system log bundles (I get message: log bundle has not been generated) and I can't install vmtools on vm's (vmtools can't be found).
VM's (a lot vm's) are placed on this host and are running without problems (perhaps because that ESXi is loading to memory).
The question is, how can I diagnose this situation and will the system start up after reboot.
Greetings
Kris