View Only
  • 1.  Error for VS installing

    Posted Mar 25, 2013 09:11 AM

    Dear :

    I try to install vsa on vCenter,but something worng so that i can finish the install.

    beacuse it show error on vsa1 host in the process of "select  host  "

    as the link :

    How shuld I slove it?

    If  I do use VLAN ,SHOULD I set the VLAN for those?


  • 2.  RE: Error for VS installing

    Posted Mar 25, 2013 10:01 AM

    Issue 1 : the error in VSA1 host

    Looks like the error in VSA1 host is due to the Letter Case in switch name VSA-VMotion. Please make sure the letters marked in red are in CAPITAL letters, ie,  VSA_VMotion.

    Issue 2 : warnings in VSA1 and VSA2.

    Please make sure vSwitch0 has both the Uplinks LIVE. ie vmnic0 and vmni2 are connected.

  • 3.  RE: Error for VS installing

    Posted Mar 26, 2013 01:01 AM

    Dear yezdi:

    Thx your help,

    I fix the ltetter VSA-VMotion ,the error was sloved.

    But,No there is another error  during my installing procss.

    I change my ip to for all period.

    Q1.Where does the subnet ip : come from ?

    Becase ,iI show error when I want to  install the VSA .

    I am sure my vCenter and Host had correct ip,subnet mask,getway....

    another info:

    It saied that can't use 192.168.X.X private IP? Is it Sure?

    Q2.IF I don’t use DHCP ,can I set the vSphere Feature ID address ,and Back-end ip Address by myself?

    And doe’t use VLAN ID ,if I don’t have it?

    Q3. one Host has 4 port for uplink.

    now  ,I just uplink as below:

    vmnic0  --UPLINK



    vmnic1  --UPLINK


    Now i had change the uplink as: TYPE1

    vmnic0  --UPLINK

    vmnic2  --UPLINK




    ----------------------------------------OR TYPE2

    vmnic0  --UPLINK

    vmnic2  --UPLINK




  • 4.  RE: Error for VS installing

    Posted Mar 26, 2013 08:45 AM

    dear yezdi:

    finally ,i found the soluation in my case as:

    cannot createvsa cluster:cluster's subnet is invalid,shoud not be

    I use the same ip range in the BACK-END IP ADDRESS.

    if I use 192.168.100.XXX

    then my BACK-END IP ADDRESS can be any 192.168.XXX.XXX ,jsut not 192.168.100.XXX



  • 5.  RE: Error for VS installing

    Posted Mar 25, 2013 04:29 PM

    Can you post the error that you are seeing while selecting the host during deploy?

    Agree with yezdi. vMotion networking label should be same. I beleive it should solve your issue. VLAN does not correlate to the error.