ESXi

 View Only
Expand all | Collapse all

Connectivity issue between Esxi and VMs

  • 1.  Connectivity issue between Esxi and VMs

    Posted Jan 10, 2012 07:51 PM

    Dear Techies,

         I am facing some problem while implementing Vmware started Kit, we are facing Network connectivity issue between virtual and physical Esxi host.
    One thing i noticesd that my Exsi host supports Direct Path I/O but the Virtual servers deployed on Esxi host does not !! , and also my virtual servers are able to access Gateway, Dns and LAN but it gives huge latency and RTO while pinging the exhi host on which they were deploy on.
    Due to this network issue i am unable to add Esxi host (Physical) and V manager server (Virtual) to my Vcenter Server (Virtual).
    Please let me know what might be wrong :smileysad:
    Following are the configuration of my Servers:
    ESXi Host Server Hardware configuration :-
    Model- HP ML 350 G6
    RAM- 16 GB
    Processor- 2 Quad core.
    HDD-  2 TB capacity each = total  6 HDD installed.
    NIC - 02  (We are using just one NIC for VM and Management Network)
    OS- ESXI 5.0 Ver.
    Vcenter Server Hardware configuration (Virtual):-
    RAM-  4 GB
    Processor- 1 Socket 2 cores.
    HDD-  200 GB
    VM Version 8
    O/S: Windows 2008 R2 Std. 64 bit
    Vmanager Server Hardware configuration (Virtual):-
    RAM-  4 GB
    Processor- 1 Socket 2 cores.
    HDD-  200 GB
    VM Version 8
    O/S: Windows 2008 R2 Std. 64 bit

    Regards

    Jasmeet Singh



  • 2.  RE: Connectivity issue between Esxi and VMs

    Posted Jan 10, 2012 09:03 PM

    Wrong community, moderator, can you move this to the right one?



  • 3.  RE: Connectivity issue between Esxi and VMs

    Posted Jan 10, 2012 09:08 PM

    This has been moved over to the VMware ESXi 5 forum.  



  • 4.  RE: Connectivity issue between Esxi and VMs

    Posted Jan 11, 2012 03:34 PM

    Still no cure :smileysad:

    • I am able to connect Esxi host directly through Vsphere client.
    • When i connect to Vcenter server through Vsphere client it says exsi host disconnected (screen shot added)
    • When i try to reconnect or add the host again it gives error. (screen shot added)
    • In View admin it says 2 services down esxi host and datastore (screen shot added)

    But one strange thing happened  I AM STILL ABLE TO ACCES MY WINDOWS 7 VM THROUGH VIEW CLIENT !!

    I don't know what is happening :smileysad:

    Help me out:smileycry:

    Jasmeet

    +919871092728

    jasmeet@akalinfosys.com



  • 5.  RE: Connectivity issue between Esxi and VMs



  • 6.  RE: Connectivity issue between Esxi and VMs

    Posted Jan 23, 2012 02:41 PM

    How can i check the firmware version of the NIC on my esxi host? I tried to find it in BIOS but no luck.

    I have just checked the Driver version that is latest and all my VMs are using VMXNET3.



  • 7.  RE: Connectivity issue between Esxi and VMs

    Posted Jan 23, 2012 02:54 PM

    Inside of the vSphere Client go under configuration for your ESXi server.  Select health status and the expand software componets.  The firmware for the selected hardware devices should be listed there.



  • 8.  RE: Connectivity issue between Esxi and VMs

    Posted Jan 23, 2012 05:33 PM

    Thanks for reply Ryan,

    But i want to find out the firmware version of my physical NIC "Broadcom Corporation NetXtreme BCM5715 Gigabit Ethernet"



  • 9.  RE: Connectivity issue between Esxi and VMs

    Posted Jan 23, 2012 07:04 PM

    I have checked th e firmware version of my NICs it is 5715-v3.29. Following is the SSH commands and results

    ~ # esxcfg-nics -l
    Name    PCI           Driver      Link Speed     Duplex MAC Address       MTU    Description
    vmnic0  0000:03:04.00 tg3         Up   1000Mbps  Full   68:b5:99:b4:c4:8a 1500   Broadcom Corporation NetXtreme BCM5715 Gigabit Ethernet
    vmnic1  0000:03:04.01 tg3         Up   1000Mbps  Full   68:b5:99:b4:c4:8b 1500   Broadcom Corporation NetXtreme BCM5715 Gigabit Ethernet
    ~ # ethtool -i vmnic0
    driver: tg3
    version: 3.110h.v50.4
    firmware-version: 5715-v3.29, UMP 1.23
    bus-info: 0000:03:04.0
    ~ # ethtool -i vmnic1
    driver: tg3
    version: 3.110h.v50.4
    firmware-version: 5715-v3.29
    bus-info: 0000:03:04.1


  • 10.  RE: Connectivity issue between Esxi and VMs

    Posted Jan 24, 2012 05:58 AM

    Aktal.. as per your second screenshot, you are able to connect your host. Are you facing network issue intermittenetly ? did you restarted your management network on ESXI?



  • 11.  RE: Connectivity issue between Esxi and VMs

    Posted Jan 25, 2012 09:18 AM

    yes, network issue is intermittenet. But i found a workaround, it starts working when i disconnect the uplink for 1- 15 seconds from my network switch.



  • 12.  RE: Connectivity issue between Esxi and VMs

    Posted Jan 25, 2012 09:26 AM

    Good to hear. Check is there any loop occuring in your swich to avoid this problem in future.



  • 13.  RE: Connectivity issue between Esxi and VMs