So essentially I have 2 main switches connected to our VMware environment. The switches are set up as port channels 2 gigs each port going into Vmware. After extensive research I found the issue is not the problem but on the VMware side. Essentially there is network lag and general slowness which I believe is attributed to LACP not fully working between the Vmware and Switches. Oddly enough on all hosts vmnic0 seems to the the culprit. I get half a light from the vmnic0 physical port and CDP is not enabled on the NIC logically. Can someone point me to the right direction on what the issue might be? Thank you to everyone in advance.
-------------------------------------------