VMware vSphere

 View Only
  • 1.  2 NIC - Network different

    Posted Apr 30, 2018 04:42 AM

    Good evening group,

    I'm not very skilled in vmware and I think I'm doing something wrong.

    I have 2 NIC

    1 vmnic0 is to handle the entire LAN theme of 2 virtual machines, this is OK

    1 vmnic1 is to receive a SIP trunk from my operator. Here is the problem.

    I did:

    1. Create a TCP / IP Stacks

    2. Create a Virtua switch

    3. Create a port group

    The problem is that when I create a new machine and I want to add a network of the new port group I do not have it dispobile

    And when I see the network summary on the host, I only get the default vmware

    I appreciate your help to know what I'm doing wrong or what I should do adiconal to be able to use the 3cx network according to the example.

  • 2.  RE: 2 NIC - Network different
    Best Answer

    Posted Apr 30, 2018 10:50 AM

    If it is a VM traffic there is no need for you to create another TCP/IP stack .. the second TCP IP stack can be removed. not required.

    A 2nd TCP IP stack can be used in cases where you want a different gateway for the vmkernel network.. other than the already existing.

    I am not sure if there is any link to the 2nd Switch and the 2nd TCP/IP stack.

    If you could remove the 2nd vSwitch also and recreate..

  • 3.  RE: 2 NIC - Network different

    Posted Apr 30, 2018 10:51 AM

    from design point you can put all the networks in singly switch with 2 physical nics and use vLANs.. this will give you redundancy

  • 4.  RE: 2 NIC - Network different

    Posted May 02, 2018 04:24 PM

    The additional TCP IP stack was frozen and the rest of the configuration was left the same

    Thanks for your help