07-26-2013 02:28 AM
is there any OID to "walk" through, with the virtual fabrics configured in a chassis?
We have some DCXs, with several VFs:
<switchname>:FID128:<username>> lscfg --show
Created switches: 128(ds) 61 63 65
I need to get this same information (128, 61, 63, 65... or any other) using an snmpget o walk.
The problem is that I can't find this information in the "Fabric OS MIB Reference v7.0.0"...
Does someone know if it's possible to get this info using OIDs??
Thanks in advance!
08-06-2013 05:10 PM
Well, not exactly. The VF information has been added the appropriate Event Groups depending on how it best fits. I copied a couple of examples out of the MIB reference guide below:
For the SW group:
From Fabric OS v6.2.0, the sw traps will have an extra binding associated to indicate the Virtual Fabric (VF). The traps will have a Virtual Fabric ID (VFID) associated with them.
For the Event Group there is the following object:
This object identifies the Virtual Fabric ID.
I hope the above helps out a bit.
08-06-2013 10:50 PM
Also oid .184.108.40.206.4.1.15220.127.116.11.1.2.15 will tell you the vfid.
.18.104.22.168.4.1.1522.214.171.124.1.2.16 contains vfname
But for those 2 you already have to direct your SNMPv3 get to context=vfid, if I remember correctly.
Martin's suggestion is based on the eventtable, which contains event generated by the chassis/VF/LS/?.
And as I understand alajandro, the goal is to get a table/list of VF present in the chassis when querying the device on SNMP.
If its'based on the eventtable then each VF should report a event on a regular basis to stay current.
Unfortunately I'm unaware of a single SNMP get on a OID that will list you all VFid's.