For more details, please see ourCookie Policy.


Management Software

Reply
Contributor
Posts: 24
Registered: ‎11-30-2017

SNMP Error : Discovered: Not registered for SNMP Traps

I have two BNA server where the same fabric is configured.  The 2nd one is newly added and I have updated the new server IP address under snmpv3.  But on the BNA am getting  the error  " Discovered: Not registered for SNMP Traps "

 

How to fix this ?

 

 

Name Discovery Status Last Discovery Time User ID Communication Protocol Community String
be10gxXxX309 Discovered: Not registered for SNMP Traps Sun Jan 20 13:00:23 EST 2019 admin HTTP *****
be10gxXxX310 Discovered: Not registered for SNMP Traps Sun Jan 20 13:00:24 EST 2019 admin HTTP *****
be10gxXxX311 Discovered: Not registered for SNMP Traps Sun Jan 20 13:00:21 EST 2019 admin HTTP *****
BE10GxXxX312 Discovered: Not registered for SNMP Traps Sun Jan 20 13:00:24 EST 2019 admin HTTP *****
BE10GxXxX313 Discovered: Not registered for SNMP Traps Sun Jan 20 13:00:24 EST 2019 admin HTTP *****
BE10GxXxX314 Discovered: Not registered for SNMP Traps Sun Jan 20 13:00:25 EST 2019 admin HTTP *****
be10gxXxX315 Discovered: Not registered for SNMP Traps Sun Jan 20 13:00:21 EST 2019 admin HTTP *****
be10gxXxX316 Discovered: Not registered for SNMP Traps Sun Jan 20 13:00:21 EST 2019 admin HTTP *****

 

 


Switch_Name:User> snmpconfig --show snmpv3

SNMP Informs = 0 (OFF)

SNMPv3 USM configuration:
User 1 (rw): snmpadmin1
Auth Protocol: noAuth
Priv Protocol: noPriv
User 2 (rw): snmpadmin2
Auth Protocol: noAuth
Priv Protocol: noPriv
User 3 (rw): snmpadmin3
Auth Protocol: noAuth
Priv Protocol: noPriv
User 4 (ro): snmpuser1
Auth Protocol: noAuth
Priv Protocol: noPriv
User 5 (ro): snmpuser2
Auth Protocol: noAuth
Priv Protocol: noPriv
User 6 (ro): snmpuser3
Auth Protocol: noAuth
Priv Protocol: noPriv

SNMPv3 Trap/Informs configuration:
Trap Entry 1: 10.237.144.22
Trap Port: 162
Trap User: snmpadmin1
Trap recipient Severity level: 4
Notify Type: TRAP(1)
Trap Entry 2: 10.210.1.153
Trap Port: 162
Trap User: snmpadmin1
Trap recipient Severity level: 4
Notify Type: TRAP(1)
Trap Entry 3: No trap recipient configured yet
Notify Type: TRAP(1)
Trap Entry 4: No trap recipient configured yet
Notify Type: TRAP(1)
Trap Entry 5: No trap recipient configured yet
Notify Type: TRAP(1)
Trap Entry 6: No trap recipient configured yet
Notify Type: TRAP(1)
Switch_Name:User>

 

 

 

 

External Moderator
Posts: 5,594
Registered: ‎02-23-2004

Re: SNMP Error : Discovered: Not registered for SNMP Traps

@k_saul 

 

--->>>I have two BNA server where the same fabric is configured. 

 

OK.

 

then you wrote:

 

--->>>The 2nd one is newly added and I have updated the new server IP address under snmpv3.

 

did you have configured on switch side with the command snmpconfig the desination trap IP ?

 

AFAIK; and I've never tested such a config - it is not possible to add multiple IP Trap.

TechHelp24
Highlighted
Contributor
Posts: 24
Registered: ‎11-30-2017

Re: SNMP Error : Discovered: Not registered for SNMP Traps

Yes, I have added both the IP's 

 

 

SNMPv3 Trap/Informs configuration:
Trap Entry 1: 10.237.144.22
Trap Port: 162
Trap User: snmpadmin1
Trap recipient Severity level: 4
Notify Type: TRAP(1)
Trap Entry 2: 10.210.1.153
Trap Port: 162
Trap User: snmpadmin1
Trap recipient Severity level: 4
Notify Type: TRAP(1)

Join the Broadcom Support Community

Get quick and easy access to valuable resources across the Broadcom Community Network.