06-27-2017 07:04 AM
I´m new user with Network Advisor and i´m try to use "firmware management" but i cant (i attach the error). I cant access via web too.
Someone can help me with this?
06-27-2017 07:49 AM
I see, the VM have different IP 172.28 as the switch with IP 172.20
--->>> I cant access via web too.
most probable is web-management not configured
Telnet to the switch, at the prompt
ICX6430>enable - press enter -
ICX6430#conf term - press enter
ICX6430(config)#web-management ? - you see all operands - and set wm to enable
about FW upgrade, I would suffest to use TFTP instead BNA.
06-27-2017 10:04 AM
This IP (172.28.1.14) is the Esxi, not the VM. The vm is 172.20.4.230 and the switch is 172.20.2.30. Is not network problem because Network is 172.20.0.0/16.
I dont understand why me tell cant access http://172.20.4.230:443 when that IP is the Network Advisor server and the switch want upgrade is 172.20.2.30
06-27-2017 10:54 AM
BNA use for FW Upgrade a TFTP and use by default Port 69, - for FOS and NOS Upgarde the FTP.
Port 443 is not a port for FW upgrade.
see here Figure 11
it show to me as you have miss config on BNA.