For more details, please see ourCookie Policy.


Management Software

Reply
Super Contributor
Posts: 644
Registered: ‎03-01-2007

Re: DS-5000B Cannot make/remove an entry for the specified session

Apparently, 5000 Switch use ATA Loader.

reboot the switch, go to console.

with the command unsetenv, Unset a boot environment variable, and save with saveenv

set the BootLoad now with setenv as descripted below

AutoLoad=yes
ENET_MAC=00012345ABCD <--- EDIT WITH THE SWITCH ENET_MAC
InitTest=MEM()
LoadIdentifiers=Fabric Operating System;Fabric Operating System
OSLoadOptions=quiet;quiet
OSLoader=ATA()0x9dfc7;ATA()0x1a24e8
OSRootPartition=hda1;hda2
SkipWatchdog=yes
gatewayip=1.1.1.1.
ipaddr=1.1.1.10
submask=255.0.0.0

NOTE

gatewayip=1.1.1.1.
ipaddr=1.1.1.10
submask=255.0.0.0

is just a Example,

let me know.

Anonymous
Posts: 0

Re: DS-5000B Cannot make/remove an entry for the specified session


The system is coming up, please wait...
Read board ID of 0x84 from addr 0x23
Read extended model ID of 0x26 from addr 0x22
Matched board/model ID to platform index 17

Read board ID of 0x84 from addr 0x23
Read extended model ID of 0x26 from addr 0x22
Matched board/model ID to platform index 17
Checking system RAM - press any key to stop test

Checking memory address: 00100000

System RAM test using Default POST RAM Test succeeded.

Press escape within 4 seconds to enter boot interface.
Booting "Fabric Operating System" image.
Blk map has an invalid version 962592768
Blk map has an invalid version 962592768
Retry reading the first kernel image
Resetting ATA controller.
Retry reading the first kernel image
ATA()0x9dfc7's entry point is too small (0x00003DB8 < 0x00100000)
Booting "Fabric Operating System" image.
Resetting ATA controller.
Blk map has an invalid version -1437226411
Blk map has an invalid version -1437226411
Retry reading the first kernel image
Resetting ATA controller.
Retry reading the first kernel image
ATA()0x1a24e8's entry point is too small (0x00003DB8 < 0x00100000)
OSLoader contains no bootable devices.
                                      ÿ

The system is coming up, please wait...
Read board ID of 0x84 from addr 0x23
Read extended model ID of 0x26 from addr 0x22
Matched board/model ID to platform index 17

Read board ID of 0x84 from addr 0x23
Read extended model ID of 0x26 from addr 0x22
Matched board/model ID to platform index 17
Checking system RAM - press any key to stop test

Checking memory address: 00100000

System RAM test using Default POST RAM Test succeeded.

Press escape within 4 seconds to enter boot interface.

1) Start system.
2) Recover password.
3) Enter command shell.

Option? 3
Password:

> printenv
AutoLoad=yes
ENET_MAC=00051E902823
InitTest=MEM()
LoadIdentifiers=Fabric Operating System;Fabric Operating System
OSBooted=MEM()0xF0000000
OSLoadOptions=quiet;quiet
OSLoader=ATA()0x9dfc7;ATA()0x1a24e8
OSRootPartition=hda1;hda2
SkipWatchdog=yes
gatewayip=192.168.20.1
ipaddr=192.168.20.5
submask=255.255.255.0
>

Moving in the right direction

Super Contributor
Posts: 644
Registered: ‎03-01-2007

Re: DS-5000B Cannot make/remove an entry for the specified session

You have a a error in the BootLoad.

This line is to much and may been removed

--->>> OSBooted=MEM()0xF0000000

Anonymous
Posts: 0

Re: DS-5000B Cannot make/remove an entry for the specified session

unsetenv OSBooted=MEM()0xF0000000

saveenv

reset


The system is coming up, please wait...
Read board ID of 0x84 from addr 0x23
Read extended model ID of 0x26 from addr 0x22
Matched board/model ID to platform index 17

Read board ID of 0x84 from addr 0x23
Read extended model ID of 0x26 from addr 0x22
Matched board/model ID to platform index 17
Checking system RAM - press any key to stop test

Checking memory address: 00100000

System RAM test using Default POST RAM Test succeeded.

Press escape within 4 seconds to enter boot interface.
Booting "Fabric Operating System" image.
Blk map has an invalid version 962592768
Blk map has an invalid version 962592768
Retry reading the first kernel image
Resetting ATA controller.
Retry reading the first kernel image
ATA()0x9dfc7's entry point is too small (0x00003DB8 < 0x00100000)
Booting "Fabric Operating System" image.
Resetting ATA controller.
Blk map has an invalid version -1437226411
Blk map has an invalid version -1437226411
Retry reading the first kernel image
Resetting ATA controller.
Retry reading the first kernel image
ATA()0x1a24e8's entry point is too small (0x00003DB8 < 0x00100000)
OSLoader contains no bootable devices.
                                      ÿ

The system is coming up, please wait...
Read board ID of 0x84 from addr 0x23
Read extended model ID of 0x26 from addr 0x22
Matched board/model ID to platform index 17

Read board ID of 0x84 from addr 0x23
Read extended model ID of 0x26 from addr 0x22
Matched board/model ID to platform index 17
Checking system RAM - press any key to stop test

Checking memory address: 00100000

System RAM test using Default POST RAM Test succeeded.

Press escape within 4 seconds to enter boot interface.

1) Start system.
2) Recover password.
3) Enter command shell.

Option? 3
Password:
>

> printenv
AutoLoad=yes
ENET_MAC=00051E902823
InitTest=MEM()
LoadIdentifiers=Fabric Operating System;Fabric Operating System
OSLoadOptions=quiet;quiet
OSLoader=ATA()0x9dfc7;ATA()0x1a24e8
OSRootPartition=hda1;hda2
SkipWatchdog=yes
gatewayip=192.168.20.1
ipaddr=192.168.20.5
submask=255.255.255.0
>

I have unset the boot

Super Contributor
Posts: 644
Registered: ‎03-01-2007

Re: DS-5000B Cannot make/remove an entry for the specified session

They have made a fatal decision to edited/change the printenv.

the output show as OSLoader address be wrong.

--->>> OSLoader=ATA()0x9dfc7;ATA()0x1a24e8

with command "hinv Display hardware inventory" can you see other address as the address in my example ?

Anonymous
Posts: 0

Re: DS-5000B Cannot make/remove an entry for the specified session

> hinv
Boot PROM: Version 4.6.6, Checksum: 321e76aa, Wed Jun 16 19:08:33 2010
Platform: SWBD58, Revision 1
Processor: CPU: 333 MHz PowerPC
Main memory: 256 MB (ECC) @ 0x00000000
Primary data cache: 32 KB, 32 B lines
Primary instruction cache: 32 KB, 32 B lines
PCI device: Bus 0, Slot 2, Function 0, Vendor 0x1657, Device 0x000a
        Processor Local Bus: 133 MHz
     On-chip Peripheral Bus: 66 MHz
    External Peripheral Bus: 33 MHz
    PCI Bus: 33 MHz (internal arbiter)

here is the output

Highlighted
Super Contributor
Posts: 644
Registered: ‎03-01-2007

Re: DS-5000B Cannot make/remove an entry for the specified session

andrew,

I'm the opinion, you need the correct OSLoader=ATA address in order to restore the correct BootLoader.

If this is not listed, ,and you are unable to find, the switch must be replaced.

Join the Broadcom Support Community

Get quick and easy access to valuable resources across the Broadcom Community Network.