The Water Cooler

  • 1.  VDX 6740

    Posted Jun 21, 2018 08:31 AM

    Could someone provide me will direction as to how to handle  whats happening below. 

    Once I login using the default admin account, all these error messages occur.

    I am a newbie with these switches --help!!

     

    *************************


    SECURITY WARNING: The default password for at least
    one default account (root, admin and user) have not been changed.

    Welcome to the Brocade Network Operating System Software
    admin connected from 127.0.0.1 using console on sw0
    sw0# show version

    Network Operating System Software
    Network Operating System Version: 5.0.2
    Copyright (c) 1995-2014 Brocade Communications Systems, Inc.
    Firmware name: 5.0.2
    Build Time: 17:08:22 Jul 6, 2015
    Install Time: 18:42:13 Apr 29, 2018
    Kernel: 2.6.34.6

    BootProm: 1.0.1
    Control Processor: e500mc with 4096 MB of memory

    Slot Name Primary/Secondary Versions Status
    ---------------------------------------------------------------------------
    SW/0 NOS 5.0.2 ACTIVE*
    5.0.2

    sw0# show chassis{ 
    %INFO : This command is not available in standby state.
    sw0# 2018/06/21-19:31:43, [SEC-1197], 383, SW/0 | Active, INFO, VDX6740, Changed account root.
    2018/06/21-19:31:43, [SEC-1204], 384, SW/0 | Active, INFO, VDX6740, Root Access mode is configured to default(SSH/Telnet/Console).
    ********************************************************************************************************
    ** Crashed in OM/Worker (DcmNs::LocalInterfaceMonitorWorker::fwBackendOpInterfacemonitorThreshold())
    ********************************************************************************************************

    [0x100344]
    DcmNs::LocalInterfaceMonitorWorker::fwBackendOpInterfacemonitorThreshold()
    DcmNs::ThresholdMonitorLocalObjectManager::externalStateSynchronization(WaveNs::WaveAsynchronousContextForExternalStateSynchronization*)
    WaveNs::WaveObjectManager::externalStateSynchronizationSelfStep(WaveNs::PrismLinearSequencerContext*)
    WaveNs::PrismLinearSequencerContext::executeCurrentStep()
    WaveNs::PrismLinearSequencerContext::executeNextStep(unsigned int const&)
    WaveNs::WaveObjectManager::externalStateSynchronizationWorkersStep(WaveNs::PrismLinearSequencerContext*)
    WaveNs::PrismLinearSequencerContext::executeCurrentStep()
    WaveNs::PrismLinearSequencerContext::start()
    WaveNs::WaveObjectManager::externalStateSynchronizationHandler(WaveNs::PrismExternalStateSynchronizationObjectManagerMessage*)
    WaveNs::WaveObjectManager::PrismOperationMapContext::executeMessageHandler(WaveNs::PrismMessage*&)
    WaveNs::WaveObjectManager::handlePrismMessage(WaveNs::PrismMessage*)
    WaveNs::PrismThread::start()
    WaveNs::PrismPosixThread::pthreadStartMethod(WaveNs::PrismPosixThread*)
    /lib/libpthread.so.0 [0xe0f8e58]
    clone

    VERIFY - Failed: 0,
    file = sysha.c, line = 111, kernel mode
    CPU[1] PID[2139(hasmd)] TASKP[7d212680]
    PREEMPT_COUNT[1] IRQS_DISABLED[0]
    Call Trace:
    STACK MAGIC 0x57ac6e9d
    [7b89bb90] [40007fcc] show_stack+0x84/0x24c (unreliable)
    [7b89bbf0] [4055a4f4] dump_stack+0x2c/0x44
    [7b89bc00] [c15495fc] do_assert+0x3c8/0x4e8 [basic_module]
    [7b89bda0] [c5e7d41c] platform_yield_control+0x54/0x84 [castor_module]
    [7b89bdb0] [c5d3e6a8] ham_ioctl+0x554/0x10bc [hasm_module]
    [7b89be70] [40121008] vfs_ioctl+0xbc/0xec
    [7b89be90] [40121240] do_vfs_ioctl+0x94/0x774
    [7b89bf00] [401219e0] sys_ioctl+0xc0/0x12c
    [7b89bf40] [40011e7c] ret_from_syscall+0x0/0x3c
    ********************************************
    * Daemon dcm:3164 died (0)
    * Manual intervention, Thu Jun 21 19:31:53 2018
    ********************************************
    2018/06/21-19:31:51, [HASM-1200], 385, SW/0 | Active | FFDC, WARNING, VDX6740, Detected termination of process Dcmd.Linux.powe:3164.
    2018/06/21-19:31:51, [HASM-1014], 386, SW/0 | Active, CRITICAL, VDX6740, Daemon (dcm) terminated while the system was booting up.
    2018/06/21-19:31:51, [RAS-1001], 387, SW/0 | Active, INFO, VDX6740, First failure data capture (FFDC) event occurred.
    2018/06/21-19:31:51, [RAS-1004], 388, SW/0 | Active | FFDC, WARNING, VDX6740, Software 'verify' error detected.
    2018/06/21-19:32:14, [RAS-1001], 389, SW/0 | Active, INFO, VDX6740, First failure data capture (FFDC) event occurred.
    ls: /tmp/halog.*: No such file or directory
    cat: /var/log/assert.log: No such file or directory
    cpu0/0: fsl_dpa: dpa-ethernet.14: dpa_ethtool.c:48:dpa_get_settings() eth0: phy device not initialized
    ioctl(ETHTOOL_GSET) failed 19
    cpu0/0: fsl_dpa: dpa-ethernet.14: dpa_ethtool.c:48:dpa_get_settings() eth0: phy device not initialized
    ioctl(ETHTOOL_GSET) failed 19
    cpu0/0: fsl_dpa: dpa-ethernet.14: dpa_ethtool.c:48:dpa_get_settings() eth0: phy device not initialized
    ioctl(ETHTOOL_GSET) failed 19
    cpu0/0: fsl_dpa: dpa-ethernet.14: dpa_ethtool.c:48:dpa_get_settings() eth0: phy device not initialized
    ioctl(ETHTOOL_GSET) failed 19
    cpu0/0: fsl_dpa: dpa-ethernet.14: dpa_ethtool.c:48:dpa_get_settings() eth0: phy device not initialized
    ioctl(ETHTOOL_GSET) failed 19
    cpu0/0: fsl_dpa: dpa-ethernet.14: dpa_ethtool.c:48:dpa_get_settings() eth0: phy device not initialized
    ioctl(ETHTOOL_GSET) failed 19
    logout
    2018/06/21-19:34:14, [SEC-3022], 390, SW/0 | Active, INFO, sw0, Event: logout, Status: success, Info: Successful logout by user [admin].

     


    #TheWaterCooler


  • 2.  Re: VDX 6740