07-24-2007 09:52 PM
hi techhelp,our vendor sold us this solution that the blades and CP's are 4GB. we have partitioned the switch into 2 logical switches, and we are running 4GB blades on slots 1-4 and 2GB blades on slots 7-10.
07-24-2007 10:45 PM
BTW: --->>> our vendor sold us this solution that.... "and CP's are 4GB"24000 CP's are Native 2GB CP, 24K CP Support the FC4-16 Blade but is not Native 4GB CP.
07-24-2007 11:50 PM
07-25-2007 12:39 AM
I am a little confused, you Spoken by the message Posted Tue July 24 2007 09:52 PM
->>> and we are running 4GB blades on slots 1-4 and 2GB blades on slots 7-10.<BR><BR>By the Message Posted Tue July 24 2007 11:50 PM , the result you pos here from slotshow, shows only FC-16 also Blade ID2 and FC2-16 also Blade ID 4.<BR><BR>AGAIN! FC2-16 are 2GB Blade and not 4GB Blade.<BR><BR>4GB 16 Port Blade have the ID 17<BR><BR>switch:admin> slotshow<BR><BR>Slot Blade Type ID Status <BR>--
in this case, you can Configure the switch by ChassisConfig Mode 3 or 4, But this NOT SUPPORT 4GB.