For more details, please see ourCookie Policy.

Fibre Channel (SAN)

Occasional Contributor
Posts: 7
Registered: ‎11-27-2017

"zone --copy" and "zoneobjectcopy" - difference



Could you explain me what is the difference beetwen those two commands?
I would like to copy current config of zones and aliases and made some changes in configuration.
In case of fail I would like to come back to configuration without any mistakes.


FOS 7.4.1c

Broadcom Moderator
Posts: 415
Registered: ‎08-31-2009

Re: "zone --copy" and "zoneobjectcopy" - difference



Please find attached the documentation concerning both commands.

Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers. All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider. If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution"

Join the Broadcom Support Community

Get quick and easy access to valuable resources across the Broadcom Community Network.