For more details, please see ourCookie Policy.

Fibre Channel (SAN)

Posts: 0

"Lack of Buffers" Errors

We are currently experiencing problems with "lack of buffers" errors on Brocade Switches. This results in resetting the affected ports and in fabric reconfiguration (if this path was the upstream/downstream one).

Posts: 0

Re: "Lack of Buffers" Errors

It sounds like you are experiencing something very similar to us. I'm just wondering if you ever resolved your problem. If so, how did you fix it.Therefore, I am looking for help confirming if the hardware/firmware configuration for our SAN, is a supported configuration by both Nortel and Brocade. I also need suggestions for how to proceed with debugging this problem.

Join the Broadcom Support Community

Get quick and easy access to valuable resources across the Broadcom Community Network.