problem with web gui access in brocade BROCAD0000G61

[ilyasahsan]

Hi,

i have installed new SAN switch Brocade BR-300 24 port. i can login with admin account but not able to login with root user with default password. the issue i am not able to access web interface, and even no error message. Java is not a issue as i have existing brocase switch working fine.

Kernel:     2.6.34.6
Fabric OS:  v8.1.0b

[Antonio Bongiorno T… · Accepted solution]

@ilyasahsan

->i have installed new SAN switch Brocade BR-300 24 port. 

are you sure the Switch is Brocade 300 ???

1) Brocade 300 is not supported by FOS 8.x

2) in FOS 8.x is root by default disable

3) log as admin in command line and executed the command

"rootaccess --set all"

[ilyasahsan1]

Hi
I have run this command but still no success
and below is the switch part number detail
ID: LNV0000CA
Part Num: BROCAD0000G61

[ilyasahsan1]

Even i have run this command with admin user
rootaccess --set all"

[robert_kubon]

hi there

Brocade 300 [71] is supported even by FOS 8.1.2

provide us output of command:    userconfig --show -r root

rgds

[Antonio Bongiorno T…]

@robert_kubon

--->>>Brocade 300 [71] is supported even by FOS 8.1.2

From Release Notes 8.0.x

Deprecated hardware
The following Brocade devices are no longer supported starting with this release.
• 300, 5100, 5300, 7800, VA-40FC, Brocade Encryption Switch, DCX, DCX-4S
• 5410, M5424, 5430, 5431, 5432, 5450, 5460, 5470, 5480, NC-5480

From Release Notes 8.1.2

Hardware Support
Supported devices
The following devices are supported in this release:
G610, G620, X6-8, X6-4

6505, 6510, 6520, DCX8510-8, DCX8510-4
6542, 6543, 6545, 6546, 6547, 6548, M6505, 6558
7840

[robert_kubon]

@Antonio

before I replied I checked FOS 8.2.1a files and yes , it supports brcd300,5100 and 4 other older types

otherway I wouldnt write it.

[Antonio Bongiorno T…]

@robert_kubon

there are no old switches supported by FOS 8.x, excpeted Gen5 Plattforms.