For more details, please see ourCookie Policy.

Fibre Channel (SAN)

Posts: 0
Accepted Solution

problem in zoning log I need help

I have a brocade switch 4100 with O.S 5.2.0a

when I collect supportshow & supportsave 

I get the following 


Switch Health Report Report time: 11/03/2013 12:50:14 PM
Switch Name: S1
IP address:
SwitchState: HEALTHY
Duration: 963:37

Power supplies monitor HEALTHY
Temperatures monitor HEALTHY
Fans monitor HEALTHY
Flash monitor HEALTHY
Marginal ports monitor HEALTHY
Faulty ports monitor HEALTHY
Missing SFPs monitor HEALTHY

All ports are healthy

switchName: S1
switchType: 32.0
switchState: Online
switchMode: Native
switchRole: Subordinate
switchDomain: 11
switchId: fffc0b
switchWwn: 10:00:00:05:1e:03:f5:02
zoning: OFF
switchBeacon: OFF


and show analysis

Effective Configuration Warnings Zoning is OFF on this switch
But when I use "switchshow"
and "cfgactvshow"
it shows that there are an active zone already running 
I need your help as soon as possible 


Posts: 0

Re: problem in zoning log I need help

Have you tried enabling a zone configuration again?


Valued Contributor
Posts: 761
Registered: ‎06-11-2010

Re: problem in zoning log I need help



If you the switch is working without issues, that may just be a cosmetic issue. The FOS release is veeery old, so and upgrade would be a good choice.



Join the Broadcom Support Community

Get quick and easy access to valuable resources across the Broadcom Community Network.