port aggregation on fc switch 6505

mahyar · ‎02-17-2017

Hi

I have a Brocade FC Switch 6506

I want to use port aggregation so that traffic go trhouth 2 links of my switch instead of just one link to to the target.

how can i config it?

Thans

Thierry.Zimmermann · ‎08-31-2009

Hello,

You mention that you have only one 6505 switch. So do you mean to add F-port to an existing target path? In that case your target need to have 2 HBAs or dual ports.

Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers. All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider. If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution"

mahyar · ‎02-17-2017

Yes my fabric has one 6505 switch only and tow LC link connected to 2 HBA target, can i use trunk for this case?

Thank You for your reply

Thierry.Zimmermann · ‎08-31-2009

Hello,

Trunking on Brocade switches is for inter switch connection only.

Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers. All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider. If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution"

Products

Solutions

Education

Tools

Technology

Technology

Products

Tools

Fibre Channel (SAN)

port aggregation on fc switch 6505

Re: port aggregation on fc switch 6505

Re: port aggregation on fc switch 6505

Re: port aggregation on fc switch 6505

Join the Broadcom Support Community