For more details, please see ourCookie Policy.

Fibre Channel (SAN)

Posts: 0

merge errors b/t 2800 and 3800

Trying to merge a 3800 into an existing fabric with 2 2800s. The 3800 had all zone info cleared, the fabric.ops settings are all the same, and the 2 switches were ISL'd. The 2800 shows the port as a good E-port, and the 3800 reports a zone conflict, but the zone info was correctly pushed to the 3800 through the ISL and activated. Any ideas?

Posts: 0

Re: merge errors b/t 2800 and 3800

From the FOS admin guide:This command clears the zoning database on the affected switches.

Join the Broadcom Support Community

Get quick and easy access to valuable resources across the Broadcom Community Network.