For more details, please see ourCookie Policy.


Fibre Channel (SAN)

Reply
Anonymous
Posts: 0

bad cable or GBIC?

ED-DCX-4S-B

FOS 6.3.1.a

See the different error counter i captured; What i see the host connected to port is reporting dead paths and going back to live state automatically(after every few hours its occuring). If there is way to identify looking at the counters if its a GBIC or a cable problem.

Highlighted
Anonymous
Posts: 0

Re: bad cable or GBIC?

it turn out to be system board problem where the HBA was connected. After replacing the board all is fine

Join the Broadcom Support Community

Get quick and easy access to valuable resources across the Broadcom Community Network.